What sand filter do I need for my pool?

For sand filters on inground pools, I like to use a 30″ tank diameter, which has a 4.9 sq. ft. filter surface area and holds 600 lbs of sand. For small pools (under 20,000 gallons), I might advise the next size down (24″ tank) if the budget is tight.

Is a sand filter better for a pool?

Sand Filters are generally the most compact and more affordable way to filter an in-ground or above ground pool. In a sand filter, a back washing effect occurs once water flows out through the waste line cleaning the filter. Generally, the sand should be replaced about every five to eight years, based on usage.

What is the best sand pool filter?

Our Top Picks

Best Overall. FairmountSantrol AquaQuartz-50 Pool Filter Sand.
Best Bang For The Buck. Palmetto Poolfilter-50 Superior Pool Sand Filter.
Best Silica Sand. HTH 67074 Filter Sand Care for Swimming Pools.
Best Zeolite Sand. Zeo, Inc ZeoSand-50 ZeoSand Swimming Pool Sand.
Best Glass Sand.

How much does a new sand pool filter cost?

A new sand filter can cost anywhere from about $300 to more than $1,000 on average. Inground pool sand filter prices range between about $450 to over $1,200, depending on the size. Above ground pool sand filters are often cheaper at starting costs in the $300 to $500 range.

What size sand filter do I need for a 15000 gallon pool?

For instance, a 16” sand filtered system has a 1.55″ sq. ft filtered area, making it ideal for a 15,000- gallon pool.

What is the difference between Type A and Type B pool filters?

The difference between the A/C and B filter is the height. The B filter is nominally 10″ high and the A/C is 8″ high. The B filter is meant for 2500 GPH pumps. They are the same diameter and in the case of the B filter it looks a lot smaller than a traditional pleated cartr… see more.

Will play sand work in a pool filter?

Many swimming pool filters use sand to trap unwanted debris and keep it out of the pool water. Pool sand is a very effective filter, but it’s also a bit pricey. Play sand and pool sand are not the same, however, and are not interchangeable.

How often should you change the sand in a sand filter for a pool?

every 3-5 years
On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.

Can I replace my 1hp pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. This will provide the flow that is needed to circulate your pool water properly and save you from high electricity bills at the same time.

What sand filter do I need for my pool? For sand filters on inground pools, I like to use a 30″ tank diameter, which has a 4.9 sq. ft. filter surface area and holds 600 lbs of sand. For small pools (under 20,000 gallons), I might advise the next size down (24″ tank) if the…