Are strut spring compressors safe?

Compressing springs is a very dangerous job. The energy that compressed springs pack is tremendous. If your redneck, home-made coil spring compressor were to fail it could literally crack your skull, take your face off and even kill you. Use a good, high-quality spring compressor to work with your springs and struts.

Do you need a spring compressor to remove struts?

Remove the wheel and extract the old shock/strut If a spring compressor is required for your job, this is where you’d use it. There should be three bolts holding the bottom of the strut in place, which you can loosen with a socket wrench.

Why must you use a spring compressor when servicing struts?

The purpose of a coil spring compressor is to remove the tension from a strut assembly so that it can be safely disassembled for service and then reassembled afterwards. That effectively removes the tension from the strut assembly so that the plate can be unbolted, and the cartridge may safely be replaced.

Can you compress a strut by hand?

Yup, i could compress my new Koni FSD’s almost completely by hand. However, the harder/quicker you push, the harder it is to compress.

What’s the difference between quick struts and regular struts?

What’s the difference between these two options? The answer is pretty straightforward: A loaded strut (also known as a quick strut) comes as an assembly with everything pre-installed, including the coil spring, mount, etc. An unloaded strut does not come as an assembly—all you get is the strut itself.

Are pre loaded struts worth it?

Loaded struts are almost twice the cost of a strut and upper mount, but it will restore the vehicle to like new condition, which is a good draw for customers. On the business side, if you sell a more expensive part, you will make more money. Also, since it takes less time, you can move on to the next job quicker.

What is an automotive coil spring compressor?

Coil spring compressors are tools that are used to service certain types of automotive suspensions. Some vehicles use components known as struts, which combine a shock absorber and spring into an integral component of the suspension system.

What is a strut compressor?

A strut compressor is specifically needed when replacing strut cartridges and other assembly components. With it, you can safely compress the door springs of your vehicle. This will make it easier for you to remove the strut and install its replacement.

What is strut compression?

Compression Strut. A heavy structural member, often in the form of a steel tube, used to hold the spars of a Pratt truss airplane wing apart. A compression strut opposes the compressive loads between the spars arising from the tensile loads produced by the drag and antidrug wires.

What is spring compressor?

A spring compressor is a device used to remove coil springs from an automobile. Comprised of two threaded rods and four hook-like apparatus, the spring compressor is placed on the spring’s coils and tightened.

Are strut spring compressors safe? Compressing springs is a very dangerous job. The energy that compressed springs pack is tremendous. If your redneck, home-made coil spring compressor were to fail it could literally crack your skull, take your face off and even kill you. Use a good, high-quality spring compressor to work with your springs…