How do you use HP soap?

Hot Process for Beginners

What you will need.
Step 1: Measure and prepare.
Step 2: Melt your oils.
Step 3: Mix up your lye solution.
Step 4: Combine melted and liquid oils.
Step 4: Time to Make the Soap!
Step 4: Cook it!
Step 5: Craft your masterpiece.

How do I know when my HP soap is done?

As the soap cooks in the crock pot, it will start to gel along the sides of the crock pot, because that is where the soap is hottest. You can tell the soap is gelling because it becomes translucent (which means you can kind of see through it and it looks like jelly). Once the soap is fully gelled, it is done cooking!

How do you make a hot compress soap?

Basic Hot Process Soap Recipe (aka Crock Pot Soap)

10 oz olive oil.
20 oz coconut oil.
9 oz distilled water.
4.78 oz 100% pure lye.
Essential oils for scent (optional)

How long does it take HP soap to cure?

Cover the soap and set it aside. It will take 24 to 48 hours to cool down and harden enough to unmold and cut. Since the saponification process is complete, the soap is technically ready to use as soon as you cut it, but like cold process soap, it will benefit from a cure of a few weeks.

Is cold process soap better?

Depending on the ingredients you use, cold process soap making typically yields a long-lasting bar of soap. Cold process soaps are better for the environment, healthier for the skin and can be made incredibly moisturising with limitless designs and recipes.

Why is my soap separating?

Separation occurs when the fragrance oil can’t be mixed into the soap batter, and oil slicks can start to pool on top of the batter. The main difference between them is you can see pools of oil on the soap with separation — it almost looks like it’s falling apart.

Can you overcook soap?

Be sure not to overcook the soap; you don’t want too dry a texture for the next steps! NOTE: The amount of time that the soap takes in the Crock Pot phase can depend on the size and shape of your Crock Pot.

Which is better hot or cold process soap?

Cold process soap batter is much thinner when it is poured into the mold, and the mold is usually insulated. Soap made through the cold process method will appear to look more shiny and polished, versus hot process soap, which tends to look more rustic.

Can you swirl hot process soap?

Have a Swirling Plan for Your Hot Process Soap There are a lot of different ways to swirl your soap! You can move the tool up and down, left to right, in concentric circles or a combination of movements. Whatever it is you decide to do, plan it ahead of time!

How do you harden soap fast?

How to Get Harder, Longer-Lasting Homemade Soap

Use a water reduction. You need to dissolve lye in water in order to turn oils into soap.
Add some wax. A small amount of beeswax added to the melted oils will help harden your DIY bar soap.
Add sodium lactate.
Increase the olive oil.
Add some salt.

How long does cold pressed soap last?

To sum up the answer to the question: “When can I use my soap?” in the most commonly known and widely familiar response: You’re free to use your cold process soaps in about 4 to 6 weeks; as soon as the bars have reached full cure.

What’s the best way to make hot process soap?

Put on your patience hat and wait 5-8 hours before unmolding your soap. Gently press on the bottom of each individual cavity until you can see an air pocket begin to form between the soap and the plastic mold. Follow that air pocket around with your fingers, making it bigger and bigger. Voila!

Why does hp soap stick to the mold?

In fact, the word that comes readily to my mind is “impossible.” HP soap comes out on the sticky side at first until it is exposed to air for a few days. In other words, it likes to stick to the mold.

How long to wait before unmolding hot process soap?

Once the mold is full, place a piece of plastic wrap over it and gently use your fingers and the palm of your hand to move the soap where you want it – make sure it fills the entire cavity of each mold. Put on your patience hat and wait 5-8 hours before unmolding your soap.

What can I add to lye to keep soap fluid?

Use sugar at 1 teaspoon per pound of oils. Add it to the lye when it has cooled off a bit. Yogurt– Yogurt helps keep the soap fluid. It has properties similar to sodium lactate. You can use yogurt at 1 teaspoon – 1 tablespoon per pound of oils.

How do you use HP soap? Hot Process for Beginners What you will need. Step 1: Measure and prepare. Step 2: Melt your oils. Step 3: Mix up your lye solution. Step 4: Combine melted and liquid oils. Step 4: Time to Make the Soap! Step 4: Cook it! Step 5: Craft your masterpiece. How…