What motor do I need for RC plane?

For your first plane I recommend a motor kv between 850kv and 1500kv. The next factor to considering a motor is size. Many beginners will end up significantly over-powering their planes and doing so adds momentum in crashes. Lighter, slower planes do not break as often as fast, heavy planes.

How do I choose a brushless motor for my RC plane?

The higher the number, the more powerful it will be. You’ll also need to make sure to specifically check how many Amps that a motor pulls in order to find the right Electronic Speed Controller (ESC). Use an ESC that is at least 20% larger than this number.

What is RC motor size?

The most common motor sizes are: 370- size (frequently used in minis or small scale), 540-size (the most typical motor on the market, used for most 1/10-scale applications), 550-size (usually used for large 1/10-scale vehicles like 4×4 short course) and 1/8-scale-size (used for 1/8-scale vehicles and large monster …

How much power does an RC plane use?

90 to 110 watts per pound is good for fast-flying scale models and some sport aerobatic aircraft. 110 to 130 watts per pound is what you want for advanced aerobatics and high-speed aircraft. 130 to 150 watts per pound is needed for lightly loaded 3D models and ducted fans.

How do I choose an RC plane propeller?

If choosing a three or four bladed propeller over a two bladed one, a very general rule of thumb is to decrease the prop diameter by an inch and increase the pitch by an inch. That said, fuselage and ground clearance issues might dictate which propeller size you can and can’t have on your plane.

What are the parts of a RC plane?

RC Airplane Parts and Controls Monoplanes. High wing: The wing is above the fuselage. Bi-Planes. The plane has two wings, usually one over and one under the fuselage. Best Wing Placement. While the increased maneuverability and response to controls in low wing and mid-wing models may sound good, they can be harder to control for inexperienced RC pilots.

What is a nitro rc plane?

Nitro RC planes give the discerning hobbyist the ability to tinker away at what is perhaps the closest thing to owning your own personal aeronautical aircraft. If you’re into the authenticity of the RC hobby, then a nitro RC plane is about as close to the real thing as you can get.

What is RC glow fuel?

RC glow fuel (‘nitro’) RC glow fuel, also often called nitro fuel, is a special blend of three main ingredients, plus a few minor additives, used in radio control model engines. There are several different blends of glow fuel available, suited to different types of engine and performance requirements.

What is a jet turbine?

Jet engines are gas turbines. A turbojet engine uses a turbine to compress the incoming air that feeds the engine before being ejected to push the plane forward; a turboprop engine uses its exhaust to drive a turbine that spins a propeller. A wind turbine generates electricity by being turned by the wind;

What motor do I need for RC plane? For your first plane I recommend a motor kv between 850kv and 1500kv. The next factor to considering a motor is size. Many beginners will end up significantly over-powering their planes and doing so adds momentum in crashes. Lighter, slower planes do not break as often as…