Is it bad to spin a revolver cylinder?

However, in single action revolvers the cylinder will not spin if the hammer is in the cocked position. After spinning the cylinder, the hammer must be cocked in order for the gun to fire. Do it too enthusiastically, and you could lose your grip on the gun, or end up with it pointing in an unsafe direction.

What holds a revolver cylinder in place?

The barrel and cylinder are then rotated back and locked in place, and the revolver is ready to fire. Since the frame is in two parts, held together by a latch on the top rear of the cylinder, top-break revolvers cannot handle high pressure or “magnum”-type rounds.

Should a revolver cylinder wiggle?

S&W and most other DA revolvers will have loose cylinders when at rest or at ignition. The looseness at ignition is to allow the chamber to align itself with the bore as the bullet passes from the chamber to the barrel.

What is the cylinder in a revolver called?

Revolver, typically, a repeating pistol that utilizes a multichambered revolving cylinder behind one barrel. Some early versions of the revolver, known as “pepperboxes,” featured multiple barrels in a single cylindrical unit that revolved around a central spindle.

Do revolvers spin?

In a modern revolver, cartridges are loaded into six chambers, each of which can be positioned in front of the gun’s barrel. The primer explodes, igniting the propellant, which drives the bullet down the barrel. The inside of the barrel is lined with spiraling grooves, which spin the bullet to give it stability.

How does a revolver mechanism work?

A revolver works by having several firing chambers arranged in a circle in a cylindrical block that are brought into alignment with the firing mechanism and barrel one at a time. A single-action revolver requires the hammer to be pulled back by hand before each shot, which also revolves the cylinder.

How tight should a revolver cylinder be?

dfariswheel Member. The Python should lock up tightly WHEN THE TRIGGER IS HELD BACK. Simply pull the trigger on an EMPTY revolver, and HOLD the trigger back. Attempt to rotate the cylinder, and it should be firmly locked in place with no movement.

What is timing on a revolver?

There are a few different timing issues with revolvers but “carry up” timing is what most people check (the hand carries up or rotates the cylinder). Basically, the cylinder should rotate and lock before the hammer drops. If it doesn’t, it is out of time.

What are disadvantages of revolvers?

Its most obvious con is that it has a slower reload time. After 5, 6, or even 7 shots, you have to reload the bullets one by one into the revolver. Make sure to never drop a revolver, too. They’re much more prone to firing accidentally when dropped.

Is it bad to spin a revolver cylinder? However, in single action revolvers the cylinder will not spin if the hammer is in the cocked position. After spinning the cylinder, the hammer must be cocked in order for the gun to fire. Do it too enthusiastically, and you could lose your grip on the gun,…