How do you take apart a Lokar shifter?

Hold the release button down and turn the shifter knob counter-clockwise to remove it. Step 2: Using a 15/16″ open end wrench, loosen the lower jam nut at the bottom of the shifter lever. Unscrew the shifter lever completely, and remove it from the shifter assembly.

How do you adjust a Lokar shifter?

Step 1: Make sure the jam nut is still in place on the shifter lever. Step 2: Screw the shifter knob onto the shifter lever until the release button comes up flush with the top of the shifter knob. Step 3: Tighten the jam nut up against the bottom of the shifter knob.

How do you use a Lokar shifter?

You must depress the release button in the top of the shifter knob in order to shift out of Park or Neutral. To shift from Park directly to Drive (or Overdrive), depress the release button and hold it down while moving the shifter lever, and the shifter lever will stop in the Drive (or Overdrive) position.

How do you adjust the neutral safety switch on a Lokar shifter?

To adjust the switch, Lokar provides an aluminum alignment plug. Start by loosening the banana bracket on the passenger side of the shifter then put the shifter into reverse. Next, remove the park/neutral switch and replace it with the aluminum plug.

Where is park on a th350?

All the way clockwise is park. full counter clockwise is 1st.

What are the signs of a bad neutral safety switch?

Symptoms of a Bad or Failing Neutral Safety Switch

Engine will not crank in park but cranks in neutral.
Engine will not crank in neutral but cranks in park.
Engine does not crank at all, regardless of the transmission gear.
Engine cranks in any gear.

What kind of transmission shifter does a Lokar use?

Lokar 12 inch Black Automatic Transmission Shifter for 4L60E Transmission operates with a solid adjustable linkage and utilizes high quality rod ends. It has a positive lock-out in park and neutral and features a neutral safety switch. It has 360 degree lever rotation for extra leg room.

Where to put Lokar column cable shift kit?

Our Exclusive Billet Aluminum Mounting Arm can be used on either side of the column. Lokar’s Column Cable Shift Kit allows you to use our shift indicator kits. It can also be used in conjunction with our Back-Up Light or Neutral Safety Switch Kit (BL-1400U) for most GM transmissions.

What kind of ring does a Lokar shifter boot have?

Billet aluminum rings also available in black anodized. Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot.

What kind of shifter does a GM 4L60E have?

Automatic Shifter, GM, 4L60E, 23 in. Double Bend Chrome Stick, Black Anodized Mushroom Knob, Each Automatic Shifter, Electronic Sport Shifters, Detent, 8.000 in. Single Bend Chrome Stick, 3/8-24 in., Brushed Mushroom Knob, 4L60E, Each

How do you take apart a Lokar shifter? Hold the release button down and turn the shifter knob counter-clockwise to remove it. Step 2: Using a 15/16″ open end wrench, loosen the lower jam nut at the bottom of the shifter lever. Unscrew the shifter lever completely, and remove it from the shifter assembly. How…